• tesla_instytute_b7.jpg
  • banner_002.jpg
  • banner_001.jpg
  • tesla_instytute_b2.jpg
  • banner_004.jpg
  • tesla_instytute_b3.jpg
  • tesla_instytute_b5.jpg
  • tesla_instytute_b4.jpg
  • tesla_instytute_b1.jpg

Visible Light Communication


Overall, the developments are quite interesting, and we could hope to see Li-Fi and other VLC technologies in the mainstream five years down the line.


 Visible Light Communication 01 TESLA Institute


APRIL 2012: “The radio spectrum is highly congested and the demand for wireless data is making this much worse. Demand for wireless data doubles every year but the available capacity cannot sustain this growth. Even with freeing up of radio frequencies by the switch from old analogue to digital TV, the available capacity is not enough. Off-loading of cellular data to Wi-Fi is now a default for smartphones but now the congestion is felt by the Wi-Fi’s. Wi-Fi data densities cannot be increased greatly due to interference. So Wi-Fi needs to offload some excess capacity, but to what?” says Dr Gordon Povey, product manager of the University of Edinburgh’s D-Light project (which has been funded by Scottish Enterprise), and CEO of PureVLC, a spinout company formed to commercialise Li-Fi—a new wireless optical communications system developed by them.

Dr Povey explains that squeezing more out of radio technologies or using an alternative such as optical technologies are the only two options available. Regardless of the technology (3G, 4G or Wi-Fi), there are three ways to increase the capacity of wireless radio systems: Find more bandwidth, add more nodes or improve the efficiency of the technology.

Visible Light Communication 02 TESLA InstituteIn the current situation, more bandwidth is being found but it’s clearly not enough -it is finite. More nodes are being added - cell splitting has been done for years - but this is expensive. Also, two nodes do not have double the capacity of one as due to interference issues, the law of diminishing returns is at play. Moreover, doubling the infrastructure will not double the revenue. Spectral efficiency has also improved over the years, but recently the increase in wireless spectral efficiencies has slowed to just 12 per cent year-on-year. So in the long run, what is the way out?

Dr Povey says that wireless optical systems can break all three of these restrictions. There is plenty of bandwidth. Modulation or demodulation is direct as there are no radios or antennae. Many nodes are feasible and they do not interfere like radio does. With plenty of resources, spectral efficiency is less sensitive and what has been developed for radio spectral efficiency can be applied to optical (with some minor tweaks). In short, Dr Povey has laid before us the case for visible light communications (VLC).

LED lights can be switched off and switched on faster than we can perceive. This off-on motion can be used to represent 0’s and 1’s—in other words, digital information. A sequence of such variations can cause a flow of data. This, or transmission by more complex modulation schemes such as Orthogonal Frequency Division Multiplexing (OFDM), is the technological basis of visible light communication or wireless optical communication.


Hello Li-Fi!

Li-Fi is a VLC technology developed by a team of scientists including Dr Gordon Povey, Prof. Harald Haas and Dr Mostafa Afgani at the University of Edinburgh. The term Li-Fi was coined by Prof. Haas when he amazed people by streaming high-definition video from a standard LED lamp, at TED Global in July 2011. Li-Fi is now part of the Visible Light Communications (VLC) PAN IEEE 802.15.7 standard.


Graham Bell tried this much earlier!

Alexander Graham Bell had experimented with visible light communications way back in 1880. He sent a voice message by modulating light. A parabolic mirror captured and projected his vocal vibrations. The drawback was that he used sunlight, which is highly unpredictable in nature. Today, the D-Light project has done something similar, using the more reliable LED technology!


Li-Fi is typically implemented using white LED light bulbs. These devices are normally used for illumination by applying a constant current through the LED. However, by fast and subtle variations of the current, the optical output can be made to vary at extremely high speeds. Unseen by the human eye, this variation is used to carry high-speed data,” says Dr Povey.

In simple terms, Li-Fi can be thought of as a light-based Wi-Fi. That is, it uses light instead of radio waves to transmit information. And instead of Wi-Fi modems, Li-Fi would use transceiver-fitted LED lamps that can light a room as well as transmit and receive information. Since simple light bulbs are used, there can technically be any number of access points.



How optical communication solves bandwidth crunch

Wi-Fi is a very good complement to cellular network and has become quite pervasive globally as a local-area network (LAN). However, since the most critical bottleneck in any wireless-based network is the air access interface, Wi-Fi is unlikely to keep up with the ever-increasing demand for bandwidth. Clearly, the bandwidth provided to the end customer is dependent upon the spectrum efficiency (bits/second per hertz of frequency spectrum bandwidth) among other limitations.

The frequency of operation and the bandwidth available for Wi-Fi networks result in the requirement for additional options. Various options include increasing the frequency of operation and associated spectrum, spatial diversity (multiple antennae), cells to cover smaller and smaller geographic ranges, cell splitting, modulation and multiple access techniques.

Clearly, there are basic technological shortcomings in Wi-Fi, e.g., security issues and sub-optimal multiple access techniques, but it is the physical nature of the air interface which requires one to look for additional solutions. Alternatives like femto-cells do augment the capacity via their operation at a different spectrum, but a key approach is to supplement LAN coverage of the Wi-Fi network via use of personal or proximity area networks (PANs).


- Dr Suresh Borkar, a faculty member at the Electrical and Computer Engineering Department, Illinois Institute of Technology



The D-Light team has developed a device that can modulate light signals to transmit and receive data. The device is being refined for commercialisation. “We have early prototypes and by the second quarter of 2012, we’ll have early Li-Fi products on the market. The initial products will be components combined with light fixtures,” shares Dr Povey. In the meanwhile, there are small problems to be overcome.

Scope for improvement

Dr Suresh Borkar is a trend-watcher, consultant and communications expert who teaches at the Illinois Institute of Technology. He opines that at the current stage of maturity, Li-Fi usage will be limited to in-house and proximity applications. The use of very high frequency (400-800 THz) limits it to very short distances and more of point-to-point communications.

The fact that Li-Fi is being considered as one of the IEEE 802.xx standards bodes well for its potential success. Like other 802.xx standards, it is defined only at layers 1 and 2 (physical and media access control (MAC) layers) of the Open Systems Interconnection (OSI) model. Layer 3 and higher layers need to be designed using the Internet Engineering Task Force (IETF) packet transport standards.

Li-Fi, according to Dr Borkar, is still in the experimental laboratory stage. Standards have to be defined and devices identified and made available along with the infrastructure and related entities before it can be used widely. Some limited prototypefriendly deployments have taken place in the last year or so but the availability of receiving devices that require arrays of photodiodes is still limited.



DIDO: Another alternative

Distributed-input distributed-output (DIDO) is a new radio technology from Steve Perlman and the Rearden Companies.

“DIDO is an attempt to provide another alternate architecture in cellular communications similar to what cloud computing is doing in the processing and database domains,” explains Dr Borkar. It is an attempt to offload the user device and provide direct communications from a data-centre based array of transmitting devices.

“Its hype is currently misleading in that it seems to squeeze more bandwidth magically when you add users in a cellular system. Like all other technologies, it still needs to obey the physical laws of communications channel limitations. It attempts to overcome such limitations by providing multiplexed dedicated channels to individual users to give appearance of providing total bandwidth of the cell to each of the users in the coverage area. Clearly, there is impact on latency and other Quality of Service (QoS) parameters, which may not meet real-time application needs. Since only limited details are currently available in the literature, it is premature to compare DIDO with any of the existing technologies,” comments Dr Borkar.



The technology also needs to evolve in many areas of miniaturisation including application-specific integrated circuits (ASICs), optical devices including photodiodes, compact arrays and modulation of optical signals. Another major area of concern is the hardware needed whenever we interface optics with electronics,” says Dr Borkar.

This concurs well with Dr Povey, who says: “The receiver optics and sensor is always an issue. We have to consider how to collect enough optical power using a non-ideal positioning of the sensor. The technology can be improved a lot. Also, we are trying to miniaturise the technology, which is  challenging.”


A few other VLC projects

Li-Fi is just one of today’s hopeful VLC technologies. Research in VLC has been going on in the UK, the USA, Germany, Korea and Japan since 2003. Casio, Intel, Samsung and Boeing are some of the biggies that are active in this field.

Some years ago, Tokyo-based Nakagawa Laboratories demonstrated underwater visible light communication technology for scuba divers. Later, in December 2010, an American company called LVX deployed light-powered broadband services at six buildings in St Cloud, Minnesota. However, they were able to achieve a speed of only 3 Mbps, which is quite slow as per today’s broadband standards.

Around the same time, a team of researchers from Siemens and Fraunhofer Institute for Telecommunications demonstrated transmission of 500 Mbps over a distance of 5 metres using a single white LED, and transmission of 100 Mbps over a longer distance using five LEDs.

Other ongoing efforts in this space include Boston University’s Smart Lighting Engineering Centre, the European Union’s OMEGA-Home Gigabit Access project and University of California’s Ubiquitous Communication by Light (UC-Light) Centre at Bourns College of Engineering.

Quite recently, at the Consumer Electronics Show 2012, Casio demonstrated the prototype of a VLC product. Casio has been a member of the Visible Light Communications Consortium since it was initiated in 2004. In addition to fundamental research and standards development for VLC, Casio is developing applied technology for receiving signals through the use of image sensors such as complementary metal-oxide-semiconductor (CMOS) and charge-coupled-device (CCD) sensors.

Casio’s image sensor communications technology can determine the point of data transmission while simultaneously receiving many signals. The company has used its image sensor communications technology to develop the proto-type of a smartphone VLC system for consumer and commercial applications. The system flashes smartphone screens to achieve VLC. Casio demonstrated a potential social media application.

This is how the system works: When someone takes a photo with a smartphone camera, the subjects simply turn the screens of their smartphones toward the camera device to display personal information or messages in the photo. The photo-taker’s phone can receive data from up to five smartphones to add information to the photo. The information is displayed in message balloons of up to 120 characters, with customisable balloon shapes and image frames. Information such as e-mail addresses, telephone numbers and social network usernames is automatically saved on the photo-taker’s smartphone. Twitter-upload tweets the image containing the messages. The same technology can be extended to backlit ad banners and more.

Overall, the developments are quite interesting, and we could hope to see Li-Fi and other VLC technologies in the mainstream five years down the line.

However, one misconception needs to be cleared at the very outset: Li-Fi or similar technologies, for that matter, do not compete with Wi-Fi, but complement it.

“I don’t see a battle between Li-Fi and Wi-Fi,” says Dr Povey. “Cellular data does not really compete with Wi-Fi. They complement each other. I see the same position with Li-Fi. When the cellular networks became congested, we were encouraged to use Wi-Fi at home or in the office to offload the excess demand. Now Wi-Fi is getting overloaded and so for short-range high-data rate links, it seems logical to offload the excess demand to Li-Fi. Because of the exponentially growing demand for data, we have a choice—a light bulb or a cable,” he adds.